Epson LX-810 Guide de l'utilisateur télécharger pdf (Page 17)

Choosing a Place for the Printer

Note: If you plan to use a printer stand, follow these guidelines:

Use a stand that supports at least 11.6 kg (25½ lbs), which is

twice the weight of the printer.

Never use a stand that tilts the printer at an angle of more

than 15 degrees from horizontal. If you install a cut-sheet

feeder, keep your printer absolutely level.

If you position the paper supply below the printer stand, make

sure that you allow enough clearance (25 mm or 1 inch) to

keep the paper from catching on the underside of the stand.

Also see that the distance between the stand’s supports is at

least

280

(11

inches), to accommodate any paper size you

may use.

Position your printer’s power cord and interface cable so that

they do not interfere with paper feeding. If possible, secure the

cables to the printer stand.

l-4

Setting Up the Printer

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 128 129

Pas de commentaire

Epson LX-810 Guide de l'utilisateur Page 17