Epson LX-810 Guide de l'utilisateur télécharger pdf (Page 86)

Printing

l Regular gaps occur in the printout.

One-inch skip-over-perforation may be set. Set DIP switch

2-3 off.

Your line-per-page setting in your software may be

incorrect.

l Skip-over-perforation is set, but the perforation does not fall

in the center of the skip.

Adjust the loading position. See the section on DIP

switches in Chapter 3.

Make sure the DIP-switch settings match your required

paper length. See the section on DIP switches in Chapter 3.

If your application program is setting the top and bottom

margins, set DIP switch 2-3 off.

If the printer still does not print correctly, try the self test

described in Chapter 1. If the self test works properly, the printer

is all right, and the problem probably lies in the computer, the

software, or the cable. If the self test does not work, contact your

dealer or a qualified service person.

Troubleshooting 6-7

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 128 129

Pas de commentaire

Epson LX-810 Guide de l'utilisateur Page 86