Epson LX-810 Guide de l'utilisateur télécharger pdf (Page 61)

Pull Tractor

Paper handling

Pull the paper release lever to the continuous paper position;

then turn on the printer.

Position the push tractor’s left sprocket unit about 6 mm (l/4

inch) from the far left position and lock it into place. Then

load continuous paper onto the push tractor as described in

Chapter 2.

3. Press the LOAD/EJECT button to load the continuous paper.

Then press the FORM FEED button to advance the paper one

page for fitting onto the pull tractor.

CAUTION: If you use the platen knob to feed the paper,

the printer loses track of the top-of-form position. Be

sure to press the LINE FEED or FORM FEED button to feed

paper.

Open the pull tractor sprocket covers and release the sprocket

units by pulling the sprocket locks forward.

Adjust the sprocket units to match the width of the paper;

then position the paper support midway between the two

sprocket units.

Fit the holes of the paper over the tractor pins of the sprocket

units, and then close the sprocket covers.

4-10

Using the Printer Options

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 128 129

Pas de commentaire

Epson LX-810 Guide de l'utilisateur Page 61