Epson AL-M200 Series Guide de l'utilisateur télécharger pdf (Page 192)

Problem Action

The output is too light. The toner cartridge may be low or need to be replaced. Confirm the amount of

toner in the toner cartridge.

1. Check the toner level on the Consumables tab of the Printer Status window of

Status Monitor.

2. Replace the toner cartridge as needed.

Verify that the print media is dry and the correct print media is used.

If not, use the print media recommended for the printer.

See Also:

“Usable Print Media” on page 102

Try changing the Paper Type setting on the print driver.

1. On the Paper/Output tab for Printing Preferences of the print driver, change

the Paper Type setting.

Disable Toner Saving Mode on the print driver.

1. On the Graphics tab in Printing Preferences of the print driver, ensure that the

Toner Saving Mode check box is not selected.

Note:

If the problem continues even though you have taken suggested actions described above, contact our local

representative office or authorized dealer.

Toner Smears or Print Comes Off/Stain on Back Side

AL-M200 Series User’s Guide

Troubleshooting 192

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 231 232

Pas de commentaire

Epson AL-M200 Series Guide de l'utilisateur Page 192