Epson AL-M200 Series Guide de l'utilisateur télécharger pdf (Page 187)

Jam Problems

Misfeed Jam

Problem Action

Print media misfeeds occur. Remove the paper from the Priority Sheet Inserter (PSI), and then ensure that the

paper is properly inserted in the paper tray.

Depending on the print media you use, take any of the following actions:

❏ For thick paper, use the one that is 163 gsm or less.

❏ For postcard, the one up to 190 gsm is available.

❏ For thin paper, use the one that is 60 gsm or more.

❏ For the envelope, ensure that it is properly loaded in the paper tray as

instructed in “Loading Envelopes in the Paper Tray” on page 111.

If the envelope is deformed, correct it or use another envelope.

If performing manual duplex (2-sided) printing, ensure that the print media is not

curled.

Fan the print media.

If the print media is damp, turn over the print media.

If the problem continues, use print media that is not damp.

Note:

If the problem continues even though you have taken suggested actions described above, contact our local

representative office or authorized dealer.

Multi-feed Jam

Problem Action

Print media multiple feeds occur. Remove the paper from the Priority Sheet Inserter (PSI), and then ensure that the

paper is properly loaded in the paper tray.

If the print media is damp, use print media that is not damp.

Fan the print media.

Note:

If the problem continues even though you have taken suggested actions described above, contact our local

representative office or authorized dealer.

AL-M200 Series User’s Guide

Troubleshooting 187

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 231 232

Pas de commentaire

Epson AL-M200 Series Guide de l'utilisateur Page 187