Epson AL-M200 Series Guide de l'utilisateur télécharger pdf (Page 153)

Low Toner Alert Msg

Purpose:

To specify whether to show the alert message when the toner is low.

Values:

Off

Does not show the alert message when the toner is low.

Shows the alert message when the toner is low.

Factory default menu setting

Maintenance

Use the Maintenance menu to adjust print settings for each paper type, initialize the Non-Volatile

Memory (NVM), and change the toner cartridge settings.

F/W Version

Purpose:

To display the version of the controller.

Adjust BTR

Purpose:

To specify a voltage of the transfer roller (BTR) for optimum printing of each paper type. To lower the

voltage, specify a negative value. To increase, specify a positive value.

The default settings may not yield the best output on all paper types. If you see mottles on the print

output, try increasing the voltage. If you see white spots on the print output, try decreasing the voltage.

Note:

The print quality depends on the values you select for this menu item.

Values:

Plain

-3 - 3

Light Card

-3 - 3

AL-M200 Series User’s Guide

Using the Operator Panel Menus 153

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 231 232

Pas de commentaire

Epson AL-M200 Series Guide de l'utilisateur Page 153