Epson Stylus Pro 7000 Print Engine Guide de l'utilisateur Page 98
- Page / 147
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
6-6
6-6 | Maintaining and Transporting the Printer
If you’re using other media, enter the thickness value of the paper in
0.1-mm increments by pressing the
+
or
–
button.
4. Press the
Enter
button to save the setting.
ADJUST. PATT.= ALL
appears on the display.
5. Press the
Enter
button to print the full series of alignment patterns.
Each pattern consists of seven numbered rows.
If you want to print a single alignment pattern, press the +
++
+ or –
––
– button
until the pattern number appears. Then press the
Enter
button.
After you have printed all the patterns, you need to check them carefully
to determine which row in each set has the smallest gaps. Refer to the
examples shown on page 6-4, then continue with the following steps to
complete the alignment procedure:
6. Examine pattern #1 (or the pattern you printed) and determine which
row of lines has the smallest gaps.
7. Check the control panel display. It should show something like
#1 = 4,
indicating that row 4 is selected for pattern #1.
8. Use the +
++
+ or –
––
– button to select the best aligned row for pattern #1. Then
press the
Enter
button to register the setting. The control panel display
changes to show
#2 = 4
.
9. Repeat steps 6 to 8 for each pattern you printed. If you need to verify
any of the settings, press
Enter
repeatedly to cycle through the patterns.
After you have registered all the patterns, press the
Pause
button to exit
head alignment mode and return to normal printer operation.
- Printer Guide 1
- Contents 5
- 5 Monitoring the Printer 7
- 7 Resolving Problems 7
- 8 Specifications 8
- A Configuring the Printer 8
- How To Use Your Manuals 10
- Using This Printer Guide 11
- Where To Get Help 12
- ENERGY STAR Compliance 13
- Important Safety Instructions 14
- 8 16
- Chapter 1: 17
- Connecting 17
- Your Printer 17
- You can’t use both 22
- Sharing on a Macintosh 23
- Setting Up Printer Sharing 24
- Sharing in Windows 26
- My Computer 27
- Properties 32
- Chapter 2: 35
- Handling 35
- 2-2 36
- Using Roll Paper 37
- 2-4 38
- Handling Paper 39
- 2-6 40
- Handling Paper 41
- Paper Source 41
- Handling Paper 43
- To avoid damaging the 44
- Operate or Pause light is 44
- Cutting Roll Paper Manually 45
- Turning Off Trim Lines 46
- Using Cut Sheet Paper 47
- Handling Paper 49
- PRESS PAUSE BUTTON 49
- Printing on Heavy Stock 50
- Handling Paper 53
- 2-20 54
- Setting Paper Configurations 55
- Chapter 3: 57
- Printing with 57
- EPSON Drivers 57
- Choosing Basic Print Options 59
- Color Controls are most 63
- Color Management Settings 64
- Managing Print Jobs 65
- Using Monitor3 66
- Priority list box 67
- Settings selected for 67
- Cancelling Printing 68
- Chapter 4: 69
- If you need more 70
- Help button on any dialog 70
- Using the Spool Manager 79
- Chapter 5: 81
- Monitoring 81
- 5-2 82
- Printing a Status Check 84
- Monitoring the Printer 85
- Error messages (continued) 86
- Monitoring the Printer 87
- EPSON StatusMonitor 87
- 5-8 88
- Configuration 88
- 5-10 90
- EPSON Status Monitor 3 90
- 5-12 92
- Monitoring Preferences 92
- Chapter 6: 93
- Maintaining 93
- Transporting 93
- Running a Cleaning Cycle 94
- Aligning the Print Head 95
- Each pattern consists of 96
- Replacing Ink Cartridges 99
- Ink Out 100
- OPEN LOWER COVER 102
- REPLACE CUTTER 102
- Improved Windows Printing 104
- Cleaning the Printer 106
- Transporting the Printer 107
- Do not roll the printer 109
- MAINTENANCE REQ. 0100 110
- SERVICE REQ. 00000100 110
- Chapter 7: 111
- Resolving 111
- Problems 111
- Using Hex Dump Mode 112
- Improving Print Quality 112
- Print quality problems 113
- 7-4 114
- Solving Operational Problems 115
- 7-6 116
- Resolving Problems 117
- 7-8 118
- Solving Paper Problems 119
- Clearing Paper Jams 121
- 7-12 122
- TURN PWR OFF AND ON 122
- Paper Out 122
- LOAD PAPER 122
- Solving Windows USB Problems 123
- Solving USB Cable Problems 125
- 7-16 126
- Chapter 8: 127
- Specifications 127
- 8-2 128
- Environmental 129
- Mechanical 129
- Electrical 130
- Initialization 130
- Safety Approvals 130
- Ink Cartridges 131
- Parallel Interface 132
- USB Interface 133
- 8-8 134
- Appendix A: 135
- Configuring 135
- Restoring Default Settings 138
- Index 145
Produits connexes et manuels pour Imprimer et scanner Epson Stylus Pro 7000 Print Engine
(4 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.532 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels