Epson Stylus Pro 7000 Print Engine Guide de l'utilisateur télécharger pdf (Page 44)

2-10

2-10 | Handling Paper

6. Holding the bottom edge of the paper, turn the roll back to remove the

slack. Then align the paper with the two rows of holes.

7. Pull the paper set lever all the way up, then close the roll paper cover.

PRESS PAUSE BUTTON

appears on the control panel display.

If you’re using Auto Cut and the edge of the paper is uneven, press

Cut/Eject

to recut the edge.

8. Press the

Pause

button. The print head moves and the paper feeds into

printing position automatically.

READY

appears on the control panel

display. (Even if you don’t press

Pause

, the paper and printer will move

into printing position automatically after 10 seconds.)

Caution

To avoid damaging the

printer, never move the

paper set lever while the

Operate or Pause light is

flashing.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 146 147

Pas de commentaire

Epson Stylus Pro 7000 Print Engine Guide de l'utilisateur Page 44