Epson Stylus Pro 7000 Print Engine Guide de l'utilisateur télécharger pdf (Page 122)

7-12

7-12 | Resolving Problems

3. Open the roll paper cover and rewind the paper using the paper stop on

the right. Carefully pull down the jammed paper.

4. When

TURN PWR OFF AND ON

is displayed on the control panel,

close the lower cover, if necessary, then press the

Power

button to turn

the printer off. Press it again to turn the printer back on.

5. Make sure the

Paper Out

light is on and

LOAD PAPER

is displayed on

the control panel. Then reload your paper.

When you’re not printing on roll paper, make sure you secure the roll

with the roll paper belt. See page 2-7 for more information.

6. If you’re not going to continue printing, make sure the print head is in

the home (far right) position, as shown below. If it’s not, turn the

printer on, wait until the print head moves to the home position, then

turn off the printer.

Caution

If the print head is not

left in the home position,

print quality may decline.

head

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 146 147

Pas de commentaire

Epson Stylus Pro 7000 Print Engine Guide de l'utilisateur Page 122