Epson Stylus Pro 7000 Print Engine Guide de l'utilisateur télécharger pdf (Page 38)

2-4

2-4 | Handling Paper

3. Position the roll so the paper unwinds as shown:

4. Slide the roll onto the spindle so it fits securely over the paper stop.

5. Slide the movable paper stop back onto the spindle and insert it firmly

into the end of the roll.

Removing Paper from the Spindle

When you need to change paper, follow these steps to remove the paper roll

from the spindle:

1. Open the roll paper cover and lift out the roll and spindle.

If the paper is loaded for printing, first lower the paper set lever and roll

up the paper before you remove the spindle.

2. Lay the roll down on a flat surface.

3. Loosen the movable paper stop by tapping it with your hand.

4. Slide the paper stop off the end of the spindle.

5. Remove the roll from the spindle.

6. Attach the new paper roll to the spindle.

paper stop

Caution

To avoid damage, do not

tap the end of the spindle

on the floor.

Note

Store unused roll paper in

its original package—

including the bag, end

caps, and box—to protect

the paper.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 146 147

Pas de commentaire

Epson Stylus Pro 7000 Print Engine Guide de l'utilisateur Page 38