Epson RX700 Manuel d'instructions télécharger pdf (Page 62)

62 Scanning to a Memory Card

2. Make sure the memory card light (next to the card slots) is off and all the slots

are empty. Then insert your card as shown:

The memory card light flashes, then turns green.

Note:

If the card is not properly formatted, you see a message on the RX700 screen.

Press the button indicated on the RX700 screen to format the card. Any data

stored on the card will be erased.

Scanning a Photo

After inserting a memory card, follow these steps to scan a photo to the card and

save it in JPEG format:

1. Open the scanner lid.

2. Place your photo face-down on the glass

in the upper-left corner, as shown.

Tip:

Slide your photo about 1/8 inch away from

the edges of the glass to ensure that the

edges of your photo are copied.

3. Close the scanner lid.

4. Press the

Scan button.

CompactFlash or

Microdrive (bottom)

MemoryStick, SD, or

MMC (middle)

SmartMedia or xD

(top)

Memory

card light

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 97 98

Pas de commentaire

Epson RX700 Manuel d'instructions Page 62