Epson RX700 Manuel d'instructions télécharger pdf (Page 52)

52 Printing on CDs and DVDs

Printing Your Design

After you have created your design and loaded a CD or DVD, you’re ready to

print.

1. Open the File menu and select

Print.

2. Make sure

Stylus Photo RX700 is selected, then click Print.

3. When printing is complete, pull the tray out of the printer and let the disk dry

fully before handling it.

If you want to check the print position or color, see the instructions for “Adjusting

the Print Position” below and “Adjusting the Print Density” on page 54.

Adjusting the Print Position

If your printed images and text are not centered or positioned the way you want,

you may need to adjust the printing position. Use the blank cardboard check disk

included with your RX700 or an extra CD.

1. Place the check disk (or an extra CD) on the CD tray and insert it into the

printer, as described on page 48.

2. Start EPSON Print CD.

3. Select

Print from the File menu.

4. Make sure

Stylus Photo R700 is selected, then click Print Position

Confirmation Pattern

(Windows) or Print Position Check Pattern

(Macintosh).

Macintosh

Windows

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 97 98

Pas de commentaire

Epson RX700 Manuel d'instructions Page 52