Epson RX700 Manuel d'instructions télécharger pdf (Page 55)

Printing a CD/DVD Without a Computer 55

Printing a CD/DVD Without a Computer

You can use your Stylus Photo RX700 to print a colorful design directly onto a

CD or DVD without using your computer. You can’t print text on your disk this

way, but you can either scan a design and copy it onto the disk or use photos from

your digital camera’s memory card. You can further enhance your CD/DVD

collection by making your own jewel case inserts.

See the appropriate section below, depending on whether you want to scan an

image (such as a drawing or 4 × 6-inch photo) or use an image from your digital

camera’s memory card.

Using a Printed Image

Follow these steps to copy a photo or other printed image onto your disk.

1. Place the design you want to copy on the scanner glass (see page 14). The

image is automatically cropped and resized to fit on the disk.

2. Press the

Copy button, then select CD Copy as the Copy Layout.

3. Select

Text as the Quality setting.

4. Press the x

Color button to copy in color, or the x B&W button to copy in

grayscale. Your disk is printed.

To cancel printing, press the y

Stop button.

5. When printing is complete, pull the tray out of the printer and let the disk dry

fully before handling it.

Tip:

If ink smears on your printed disks, you may need to adjust the ink density. Disks from

different manufacturers absorb ink differently, so you may need to adjust the setting for

each brand. After making basic print settings, press the Options button. Change the

Copy Density as needed, then press OK.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 97 98

Pas de commentaire

Epson RX700 Manuel d'instructions Page 55