Epson EPL-N2000 Guide de l'utilisateur télécharger pdf (Page 72)

6-6 Configuring the EPL-N2000 for OS/2

Copying the Piping Software

Follow these steps to create a remote print service directory and

copy the EPL-N2000 piping software:

1. If you’re unsure of the printer’s serial number, print a

network adapter status sheet. See Chapter 1 for details.

2. Insert the diskette labeled EPSON Net! for NetWare DOS

and OS/2 in your workstation’s diskette drive.

3. Open an OS/2 full screen command session.

4. To create a remote print service directory, type the following

at the OS/2 command line:

MD C:\EPNET

5. Open the OS/2 directory on drive A (or B) and go to the

PIPES directory for your network protocol.

❏ If your protocol is TCP/IP, type CD TCPIP\PIPE and

press the Enter key.

❏ If your protocol is NetBEUI, type CD NETBEUI\PIPE and

press the Enter key.

6. Copy all files in the PIPES directory to the remote print

service directory:

❏ If your protocol is TCP/IP, type the following:

COPY A:\TCPIP\PIPE\*.* C:\EPNET

❏ If your protocol is NetBEUI, type the following:

COPY A:\NETBEUI\PIPE\*.* C:\EPNET

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 90 91

Pas de commentaire

Epson EPL-N2000 Guide de l'utilisateur Page 72