Epson EPL-N2000 Guide de l'utilisateur télécharger pdf (Page 24)

Configuring the EPL-N2000 for NetWare 2-7

4. Make sure Print Server is selected as the operating mode. In

the Print Server name box, enter a unique name up to 32

characters long.

Note:

It’s a good idea to choose a name that’s easy for other users to

remember, such as a department name, or the name of the printer’s

owner. A period is allowed if it is not the first character. However,

you cannot use a space or any of the following characters:

/ \ : ; . * | + [ ] “

5. Click Add at the bottom of the dialog box to assign a print

queue to your print server.

The Add Queue dialog box appears. The Queue drop-down

list indicates which queues are available on this NetWare file

server.

6. Select a print queue from the Queue list, or create a new

queue by entering its name in the Queue box.

7. Select a priority level for the queue in the Priority box. You

can set a level from 1 to 10, with 1 having the highest

priority.

8. Click OK. The NetWare Config dialog box appears again.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 90 91

Pas de commentaire

Epson EPL-N2000 Guide de l'utilisateur Page 24