Epson EPL-N2000 Guide de l'utilisateur télécharger pdf (Page 54)

Configuring the EPL-N2000 for UNIX 5-3

3. From the host computer, use arp to assign a unique IP

address to the printer. The format is as follows:

arp-s <IP address> <node address>

The following example illustrates the arp command:

arp-s 133.200.3.181 00:00:48:92:DA:35

4. Use ping to verify that you have assigned a unique address.

If another device responds, repeat step 3 to assign a different

address. The format is as follows:

ping <IP address>

The EPL-N2000 is set to this IP address.

5. Edit the /etc/hosts file on the host computer to include the

new IP address and a host name. The format is as follows:

For example, you might make the following entry:

132.147.69.4 Allison

Note:

Choose a name that’s easy for other users to remember, as the host

name is used to identify the printer when sending print files. A

department name or the computer owner’s name are good choices.

6. Use ping to make sure that the EPL-N2000 is responding.

You can use either of the following formats:

ping <host name>

ping <IP address>

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 90 91

Pas de commentaire

Epson EPL-N2000 Guide de l'utilisateur Page 54