Epson EPL-N2000 Guide de l'utilisateur télécharger pdf (Page 21)

2-4 Configuring the EPL-N2000 for NetWare

If you are configuring the EPL-N2000 as a print server, go to

the next section in this chapter. If you are configuring the

EPL-N2000 as a remote printer, go to “Configuring the

EPL-N2000 as a Remote Printer.” If you want to configure

the printer to switch automatically between these two

modes, go to “Configuring the EPL-N2000 to Switch Modes”

at the end of the chapter.

Configuring the EPL-N2000 as a Print Server

In Print Server mode, the EPL-N2000 performs all print server

functions and can service up to 32 print queues and eight file

servers. No VAP (Value-Added Process) or NLM (NetWare

Loadable Module

) is required. When you send a print job from

your application, the file server assigns the print job to a print

queue. When the corresponding printer is ready, the EPL-N2000

sends the job to the printer.

Like any NetWare print server, the EPL-N2000 services the

assigned queues in round robin fashion, and services higher

priority queues before those of lower priority. For added

security, the EPL-N2000 supports encrypted passwords.

Since the EPL-N2000 is set to Print Server mode by default, you

don’t need to make any special settings to use it as a print server.

However, you do need to assign it print queues on a NetWare

file server, or on multiple NetWare file servers.

Assigning Print Queues on a Single NetWare File Server

This section explains how to assign print queues on a single

NetWare file server to an EPL-N2000 configured as a print

server. If you want to set up queues on multiple NetWare file

servers, “Assigning Print Queues on Multiple NetWare File

Servers” later in this chapter.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 90 91

Pas de commentaire

Epson EPL-N2000 Guide de l'utilisateur Page 21