Epson TM-H5000IIP Manuel de l'opérateur télécharger pdf (Page 82)

Commands 5-21

• When the LSB is 0, white/black reverse mode is turned off.

• When the LSB is 1, white/black reverse mode is turned on.

GS H

[Name] Select printing position of HRI characters

[Format] ASCII GS H

Hex 1D 48

Decimal 29 72

[Range] 0 ≤

≤ 3, 48 ≤

≤ 51

[Description] Selects the printing position of HRI characters when printing a bar code.

selects the printing position as follows:

• HRI indicates Human Readable Interpretation.

GS I

[Name] Transmit printer ID

[Format] ASCII GS I

Hex 1D 49

Decimal 29 73

[Range] 1 ≤

≤ 3, 49 ≤

≤ 51

[Description] Transmits the printer ID specified by

as follows:

=2, Type ID

n Printing posiition

0, 48 Not printed.

1, 49 Above bar code.

2, 50 Below bar code.

3, 51 Both above and below the bar code.

n Printer ID Specification ID (hexidecimal)

1, 49 Printer model ID TM-H5000/H5000P 0FH

2, 50 Type ID See table below.

3, 51 ROM version ID Depends on ROM version.

Bit Off/On Hex Decimal Function

0 Off 00 0 Two-byte character code not supported.

1 On 02 2 Auto-cutter equipped.

Off 00 0 DIP switch 2-2 is set to off.

On 04 4 DIP switch 2-2 is set to on.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 100 101

Pas de commentaire

Epson TM-H5000IIP Manuel de l'opérateur Page 82