Epson PowerLite 83c Guide de l'utilisateur télécharger pdf (Page 16)

16 Setting Up the Projector

Positioning the Projector

Before connecting the projector, you

need to decide where to place it. If

you’re setting up the projector yourself

and it isn’t already installed in the

room you’re using, you’ll probably

want to place it on a table in front of

the screen, as shown.

This lets you stand in the front of the room, face the audience, and

remain close enough to the equipment to be able to control it. Try to

leave as much space as possible between the projector and the screen to

get a good-size image.

Place the projector somewhere between 3 and 30 feet from the screen.

Use the figure below to help you determine exactly how far. Image size

increases with distance, but can vary depending on how you’ve

adjusted the optical zoom and other settings.

Also keep these considerations in mind:

■ Place the projector on a sturdy, level surface.

■ Make sure there is plenty of space for ventilation around and

under the projector. Do not set the projector on top of loose

papers that could block the vents under the projector.

■ Make sure the projector is within 6 feet (2 meters) of a grounded

electrical outlet or extension cord.

note

You can download the

Projection Distance

Calculator program from

the Drivers and Downloads

section of Epson’s web site:

www.epson.com/support

28 to 34 ft (4:3)

31 ft (16:9; wide only)

5.6 to 6.8 ft (4:3)

6.1 to 7.3 ft (16:9)

2.7 to 3 ft (4:3)

3 to 3.6 ft (16:9)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 117 118

Pas de commentaire

Epson PowerLite 83c Guide de l'utilisateur Page 16