Epson EPL-N2000 Guide de l'utilisateur télécharger pdf (Page 64)

3-20 Using the Control Panel

You may need to change printer settings before you print,

depending on your output needs. In addition to the basic printer

driver settings described in Chapter 2, check the following:

❏ Driver (plotter selection): HP-GL/2 or HP-GL

❏ Pen configuration: Pen number, pen width

❏ Plot origin: Center or corner

Make sure that Orientation is set to Landscape if you are using

GLlike mode.

If you need to change printer settings, first change the emulation

mode, then change the printer settings using the printer driver,

the Remote Control Panel utility, or SelecType.

GL2 menu items

Menu item Description

GL Mode Selects the mode: GLlike of LJ4GL2.

Scale Switches between original size and reduced size

printing; also, determines the reduction scale for

reduced size printing. (You can print data created for

the paper size selected in the Scale setting onto the

paper selected in the Page Size setting in the Printing

menu.) OFF, A0, A1, A2, A3.

Origin Sets the origin for the plotter-unit coordinate system to

the lower left corner (Corner) or to the center of the

hard-clip limit (Center).

Pen Selects the color of printed characters; 0 is white (the

background is printed instead of the character) 1 is

black, and 2 through 6 are different colors for color

printers.

End Determines the type of line ending: Butt, Square,

Triangular, or Round.

Join Defines how the ends of lines are joined: Mitered,

Miteredbeveled, Triangular, Round, Beveled, or None.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 144 145

Pas de commentaire

Epson EPL-N2000 Guide de l'utilisateur Page 64