Epson EPL-N2000 Guide de l'utilisateur Page 110

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 145
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 109
6-6 Troubleshooting
If you add more memory and you still receive a Mem Overflow
message, change the Page Protect setting in the printer driver;
see “Using the EPL-N2000 Driver” in Chapter 2 for details. (If
you are using the Windows 3.1 EPSONScript driver, change the
setting on the control panel as described in “Config Menu” in
Chapter 3.) You can also add even more memory, or print at 300
dpi instead of 600 dpi.
Operate Error Card
The PCMCIA card was installed or removed while the printer
was on. To clear the message, press ALT and Continue
simultaneously until you see Reset All in the control panel
display; or turn the printer off, then turn it back on.
Paper Jam
Paper Jam in Duplex
Paper is jammed in the paper path. Open the printer cover (or
the Duplex Unit cover) and clear the jammed paper as described
on page 6-10. The jammed page’s print data is then
automatically reprinted.
Paper Out
source size
There is no paper in the indicated paper
source
. Load paper of
the indicated
size
into the printer and press Continue.
Paper Set
source size
The paper loaded in the indicated paper
source
does not match
the required paper
size
. Replace the paper with the correct size
paper and press Continue.
Print Overrun
The time required to process data exceeds the print speed due to
an excess of received data. Press Continue to resume printing. If
this message appears again, change the
Page Protect setting in
the driver or in the SelecType Config menu; see Chapters 2 and 3
for instructions.
Vue de la page 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 144 145

Commentaires sur ces manuels

Pas de commentaire