Epson EMP-750 Guide de l'utilisateur télécharger pdf (Page 37)

Turning the Projector On

User’s Guide

Turning the Power On and Projecting Images

PROCEDURE

Check that the Power indicator has stopped flashing

and is lit orange.

Turn the power on for all equipment connected to the

projector.

For a video source, press the [Play] button at the video source to

start playback if necessary.

Press the [Power] button on either the projector's

control panel or the remote control to turn the

projector's power on.

A beep will sound to indicate that the projector is starting up.

The Power indicator starts to flash green as the projector warms

up, and an image begins to appear.

TIP

The Password Protect setting may cause the password entry screen to

be displayed each time the power is turned on.

If this happens, enter the password. sp.31

Lit orange

Remote control

Changes from flashing to lit green

TIP

If the Power indicator is flashing green, operation of the [Power]

buttons is disabled.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 120 121

Pas de commentaire

Epson EMP-750 Guide de l'utilisateur Page 37