Epson EMP-750 Guide de l'utilisateur télécharger pdf (Page 28)

User’s Guide

Playing Sound from Video Equipment

The projector has a built-in speaker with a maximum output of 1 W. You can

output sound from connected video equipment (such as a computer or video

deck) through the projector's built-in speaker if the video equipment has an

audio output port.

Select the audio cable that is used for this connection from the following,

depending on the shape of the other equipment's port.

• If connecting to a stereo mini jack (such as the audio output port of a

computer): Use a commercially-available stereo mini jack audio cable to

make the connection.

• If connecting to an RCA pin jack

×2 (red/white) (such as the audio output

port of video equipment): Use the audio adapter that is supplied with the

projector and a commercially-available A/V cable to make the connection.

If the image signals are being input to the [Computer/Component

Video] port

If the video signals are being input to the [Video] port

TIP

•You can adjust the volume after projection has started. sp.48

•If using a commercially-available 2RCA (L/R)/stereo mini-jack

audio cable, use one that is marked as "No resistance".

To audio output port

To [Audio] port

Stereo mini jack audio cable

(commercially-available)

To audio output port

To [Audio] port

Audio adapter

(accessory)

A/V cable

(commercially-available)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 120 121

Pas de commentaire

Epson EMP-750 Guide de l'utilisateur Page 28