Epson 425Wi Guide d'installation télécharger pdf (Page 27)

English

3. Route the cables through the arm unit

Route the projector’s power cord and any additional cables connecting to the projector through the arm unit.

4. Attach the wall mount to the wall plate

1. Attach the hook on the arm plate to the bar on the wall plate.

Be sure to also route the cables for any optional equipment (ex. document camera,

speakers, etc.) that may be used in the future. Otherwise, each time you need to

connect another device, you will need to remove the projector from the mount to

connect additional cables.

Route the USB cable so that the type B connector emerges on the projector side. Epson

recommends labeling any duplicate cables (ex. USB cables for interactive module

[BrightLink 425Wi/430i/435Wi] and USB Display, etc.) so that additional connections

can be more easily identified.

Arm unit

Vertical adjustment

screw

Problems may occur if you use this product without routing the cables through the arm unit.

Caution

Installation.book Page 27 Tues day, October 30, 2012 5:53 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Pas de commentaire

Epson 425Wi Guide d'installation Page 27