Epson 425Wi Guide d'installation télécharger pdf (Page 29)

English

5. Attach the attachment plate to the projector

1. Place the projector upside down.

2. Attach the attachment plate to the projector using the hexagonal wrench (M4) and five M4 × 12

mm bolts with washers/spring washers.

6. Attach the projector to the adjustment unit

1. Slide the attachment plate onto the adjustment unit as shown below.

2. Secure the adjustment unit temporarily at the points marked using two M4 × 12 mm bolts as

shown below.

Tighten the screws firmly.

M4 × 12 mm hexagon socket head cap

bolt with washer/spring washer (×5)

Projector lens side

Attachment plate

When installing or adjusting the wall mount, do not use adhesives to prevent the screws from

loosening and do not use lubricants or oils on the projector slide plate. This may cause the

case to crack and the projector to fall, resulting in personal injury or property damage.

Warning

M4 × 12 mm hexagon socket head

cap bolt without washer

M4 × 12 mm hexagon socket

head cap bolt with washer

Mark

Attachment plate

Adjustment unit

Installation.book Page 29 Tues day, October 30, 2012 5:53 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Pas de commentaire

Epson 425Wi Guide d'installation Page 29