Epson EB-S18 Guide de l'utilisateur télécharger pdf (Page 91)

If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.

See the following if the indicators do not show clearly what the problem might be.

s "When the Indicators Provide No Help" p.95

Reading the Indicators

The projector is provided with the following four indicators. The color and lit status of the indicators shows the status of the projector.

Power indicator Indicates the projector's status.

Status indicator Indicates the projector's status.

Lamp indicator Indicates the projection lamp status.

Temp indicator Indicates the internal temperature status.

Indicators Status Explanation

Power supply Status

Blue - Lit Off

Standby condition Power is being supplied to the projector. When the [t] power button is pressed in this condition, projection

starts.

Network monitoring

status

The projector is being monitored and controlled over a network (when Standby Mode is set to

Communication On). If the power cord is disconnected and connected in this status, the power indicator

flashes blue.

Blue - Lit Blue - Flashing

Warm-up status This is the status immediately after turning on the projector. Warm-up takes approximately 30 seconds after

the lamp turns on. In this status you cannot turn off the projector, even if you press the [t] power button.

Problem Solving

Downloaded from www.vandenborre.be

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 133 134

Pas de commentaire

Epson EB-S18 Guide de l'utilisateur Page 91