Epson EB-S18 Guide de l'utilisateur télécharger pdf (Page 69)

Connect the computer's USB port to the projector's USB-B port

with a USB cable.

Start from step 2 from the second time.

Command list

When the power ON command is transmitted to the projector, the power

turns on and it enters warm-up mode. When the projector's power has

turned on, a colon ":" (3Ah) is returned.

When a command is input, the projector executes the command and

returns a ":", and then accepts the next command.

If the command being processed terminates abnormally, an error message is

output and a ":" is returned.

Item Command

Power ON/OFF On PWR ON

Off PWR OFF

Signal selection Computer Auto SOURCE 1F

RGB SOURCE 11

Component SOURCE 14

HDMI SOURCE 30

Video SOURCE 41

S-Video SOURCE 42

USB Display SOURCE 51

USB SOURCE 52

LAN SOURCE 53

A/V Mute On/Off On MUTE ON

Off MUTE OFF

A/V Mute selection Black MSEL 00

Blue MSEL 01

Item Command

Logo MSEL 02

Add a Carriage Return (CR) code (0Dh) to the end of each command and

transmit.

Communications protocol

• Default baud rate setting: 9600 bps

• Data length: 8 bit

• Parity: None

• Stop-bit: 1 bit

• Flow control: None

Monitoring and Controlling

Downloaded from www.vandenborre.be

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 133 134

Pas de commentaire

Epson EB-S18 Guide de l'utilisateur Page 69