Epson ActionScanner Guide de l'utilisateur télécharger pdf (Page 26)

2-6 Calibrating Your System

4. You see a message box. Click OK when the chart is printed.

5. Place the printed calibration chart on your scanner, as shown

by the illustration on the screen.

Align the guide mark on the upper left corner of the chart

with the triangular origin mark on your scanner’s document

table. Then close the scanner’s cover.

Note:

Make sure the calibration chart is not skewed on the bed of the

scanner; if it is, the scanner cannot scan the chart.

6. If you want to change the default filename and profile

description, enter your changes in the File Name and

Description fields.

Tip:

If you are creating more than one calibration profile (for instance,

if you have more than one color printer), make sure you assign

unique descriptions to each calibration profile so you can

distinguish between them.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 129 130

Pas de commentaire

Epson ActionScanner Guide de l'utilisateur Page 26