Epson C850071 - RIP Station 5000 Guide d'installation télécharger pdf (Page 78)

5-2 Troubleshooting

Improving Print Quality

You can often improve print quality by doing the following:

• Run a cleaning cycle. See page 4-1 for instructions.

• When you send a print job, match the Print Mode

setting in your print options to

the type of substrate you’re using. See Chapter 2 for details.

• Make sure the media type and paper size levers on the paper tray are set correctly.

See Chapter 2 for details.

If this happens: Try this:

Your printout has

horizontal or vertical

banding.

• Make sure your paper or other substrate is loaded with the printable side in the

correct orientation. The printable side should be face-down in the tray or front

manual feed slot; face up in the rear manual feed slot.

• Run a cleaning cycle. See page 4-1 for instructions.

• Align the print head. See page 1-15 for instructions.

• Check the

H ink out lights to see if one of the cartridges is low on ink; then

replace the cartridge. See page 4-3 for instructions.

• Make sure the Print Mode setting for your print job matches the substrate you’re

using and the paper tray levers are set correctly. See Chapter 2 or your RIP

Station 5000 User Guide for more information.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 97 98

Pas de commentaire

Epson C850071 - RIP Station 5000 Guide d'installation Page 78