Epson EB-915W Guide de l'utilisateur télécharger pdf (Page 90)

Others menu

Submenu Function

SNMP

Set to On to monitor the projector using SNMP.

To monitor the projector, you need to install the SNMP manager

program on your computer. SNMP should be managed by a

network administrator.

The default value is Off.

Trap IP Address

1/Trap IP Ad-

dress 2

You can register up to two IP addresses for the SNMP trap

notification destination. You can enter a number from 0 to 255 in

each field of the address. However, the following IP addresses

cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x

is a number from 0 to 255)

Priority Gateway

(EB-925/

EB-915W/

EB-905/EB-96W/

EB-95 only)

You can set the priority gateway to a Wired LAN or Wireless

LAN.

Submenu Function

AMX Device Dis-

covery

When the projector is connected to a network, set this to On

when you want to enable the projector to be detected by

AMX

Device Discovery

. Set this to Off if you are not connected to an

environment controlled by a controller from AMX or AMX

Device Discovery.

RoomView

Set this to On only when monitoring or controlling the projector

over the network using Crestron RoomView

. Otherwise, set

this to Off.

s "About Crestron RoomView

" p.69

When this is set to On, the following functions are not available.

• Web control

• Message Broadcasting (EasyMP Monitor Plug-in)

List of Functions

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 157 158

Commentaires sur ces manuels

Pas de commentaire

Epson EB-915W Guide de l'utilisateur Page 90

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs de données Epson EB-915W