Epson 1700C - PowerLite XGA LCD Projector Guide de l'utilisateur Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 102
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
Solving Problems 73
If you’re using a PC notebook:
Hold down the Fn key on the keyboard and press the function
key that lets you display on an external monitor. It may have an
icon such as , or it may be labelled
CRT/LCD. Allow a few
seconds for the projector to sync up after pressing it. Check your
notebook’s manual or online help for details.
On most systems, the key lets you toggle between the LCD
screen and the projector, or display on both at the same time.
Depending on your computer’s video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer’s documentation or online help for details.
If you’re using Mac OS X:
1. Open
System Preferences.
2. Click
Displays.
3. Click
Detect Displays.
4. Make sure the
VGA Display or Color LCD dialog box is selected.
5. Click the
Arrangement or Arrange tab.
6. Make sure the
Mirror Displays checkbox is selected.
The message Not Supported is displayed.
Make sure the correct input signal is selected in the Signal menu
(see page 48).
Make sure your computer’s resolution doesn’t exceed UXGA
(1600
× 1200) and the frequency or refresh rate is supported by
the projector (see page 85). If necessary, change your computer’s
resolution setting as described below.
Only part of the computer image is displayed.
Press the Auto button on the remote control.
Make sure the image Position setting is correct in the Signal
menu. See page 49 for more information.
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 101 102

Commentaires sur ces manuels

Pas de commentaire