Epson 1700C - PowerLite XGA LCD Projector Guide de l'utilisateur télécharger pdf (Page 22)

22 Displaying and Adjusting the Image

Using Keystone Correction

To adjust your image when it is wider on the top or bottom, do the

following:

■ Press one of the two triangular buttons on the projector’s control

panel, as shown below. Continue pressing the button until you

are satisfied with the shape of the image.

■ Or press the Menu button on the remote control or projector,

select the

Setting menu, and press Enter.

From the Setting menu, select

Keystone and press Enter. Use

the pointer button on the remote control to adjust the

keystone setting as needed.

If the image becomes uneven, decrease the sharpness setting. (See

page 47.)

note

The image will be slightly

smaller after adjusting. If

it’s important to maintain

the correct aspect ratio, use

the menu system to perform

keystone correction, then use

the remote’s

Resize button

to adjust the aspect ratio. See

page 30.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 101 102

Pas de commentaire

Epson 1700C - PowerLite XGA LCD Projector Guide de l'utilisateur Page 22