Epson 810 Manuel d'utilisateur télécharger pdf (Page 21)

Setting Up the Projector 21

Turning On the Projector

1. Remove the lens cap.

2. Turn on any connected equipment you plan to use.

3. Turn on the power switch on the back of the projector.

4. Press the

On button on the remote control, or press the Power button on the projector.

Note: To keep children from turning on the projector, you can use the Child Lock (see page 31).

If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude

Mode so the fan can properly cool the projector at the high altitude air pressure. See page 46 for

details.

The projector takes about 30 seconds to warm up and display an image. If you don’t see a

picture, you may need to change the image source as described on the next page.

Power switch

Turn on the projector

PowerLite Cinema Pro 810.book Page 21 Thursday, December 6, 2007 11:25 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

Pas de commentaire

Epson 810 Manuel d'utilisateur Page 21