Epson R800 Guide de démarrage rapide télécharger pdf

1 Remove everything from the box.

See your User’s Guide for

instructions on installing

and using these parts.

2 Remove all the blue tape and packing materials inside and around the printer.

3 Open the paper support and pull up its extension.

Unpack

Turn On the Printer

Turn over

Printer

User’s Guide

Printer Software

CD-ROM

Ink cartridges

(8 individual)

Epson Stylus Photo R800

Start

Here

Start

Here

Epson Stylus

Photo R800

CPD-17408R1

4101374-00

XXX

Roll paper

holders

Connection cables are not included with your printer. You need only one of the following cables.

NOTE: Do not connect both cables.

• USB cable (preferably a Hi-Speed USB 2.0 cable for Windows

2000 or XP) or

• IEEE-1394 or FireWire

™

cable

USB Cable Users

1 Shut down your computer.

Leave your computer turned off until section 6.

2 Plug the flat end of the cable into your computer’s USB port until it stops.

(You can use any open USB port.) Don’t force the connector into its slot.

3 Plug the square end of the cable into your printer’s USB port until it stops.

IEEE-1394 or FireWire Cable Users

1 Shut down your computer.

Leave your computer turned off until section 6.

2 Plug one end of the cable into your printer’s IEEE1394 port.

3 Plug the other end of the cable into your computer’s IEEE-1394 port.

Connect the Printer

Square end

Flat end

1 Plug the printer’s power cord into a grounded electrical outlet.

2 Press and hold the power button and then release it to turn on the printer.

CAUTION: Never use an external switch, such as a wall switch

or power strip switch, to turn the printer on or off.

Install Ink Cartridges

CAUTION: Don’t load paper before you install the ink

cartridges so the paper doesn’t interfere with ink charging.

1 Open the output tray, pull out its extensions,

and open the printer cover.

2 Release and open the cartridge cover, then remove the protective sheet inside.

3 Shake the ink cartridge packages 4 or 5 times

before opening them. (Don’t shake them after

they’re unpacked.)

4 Remove the ink cartridges from

their packages.

CAUTION: Don’t remove any labels

or seals from the cartridge.

5 Slide each cartridge individually into its slot with

the green part facing the front.

Make sure the colors on the cartridges match the

labels inside the cartridge cover.

Then push each one down until it clicks into place.

6 Close the cartridge cover and press it down until

it clicks into place.

7 Close the printer cover, then press the ink button.

The green power and red ink lights flash as your

printer charges ink for about 2

minutes.

CAUTION: Don’t turn off the printer

or interrupt charging, or you’ll waste

ink. If the power and ink lights

don’t turn off after 5 minutes, and

the printer isn’t making any noise,

you can turn it off.

Don’t touch the green part

CD tray

Mini-CD

ring

Print position

check disk

1 2 3 4 5 6

Résumé du contenu

Page 1 - Turn over

1 Remove everything from the box.See your User’s Guide for instructions on installing and using these parts. 2 Remove all the blue tape and packing ma

Page 2

1 Remove everything from the box.See your User’s Guide for instructions on installing and using these parts. 2 Remove all the blue tape and packing ma

Page 3 - Epson Stylus Photo R800

1 Remove everything from the box.See your User’s Guide for instructions on installing and using these parts. 2 Remove all the blue tape and packing ma

Page 4 - Macintosh

5 Click the Search for option, then click Next.6 Click CD-ROM drive, then click Next. Make sureSpecify a location is not checked.7 At the next screen,

Page 5

5 Click the Search for option, then click Next.6 Click CD-ROM drive, then click Next. Make sureSpecify a location is not checked.7 At the next screen,

Page 6

5 Click the Search for option, then click Next.6 Click CD-ROM drive, then click Next. Make sureSpecify a location is not checked.7 At the next screen,