Epson Stylus NX400 Manuel d'utilisateur télécharger pdf

Epson Stylus

NX400 Series

Start Here

9 Press the OK button to charge the ink. Charging takes about

2½ minutes.

Caution: Don’t turn off the NX400 Series while it is charging or you’ll

waste ink.

Unpack

If anything is missing, contact Epson as described on the back.

Caution: Do not open the ink cartridge package until you are ready to install

the ink. Cartridges are vacuum packed to maintain reliability.

Canada only: For French speakers, remove stickers from the backing sheet

and place over corresponding text on the control panel.

3 Squeeze the edge guide and slide it left.

Tip: If the feeder guard is in the way, flip it forward.

4 Load paper against the right edge and underneath the tab.

Note: Don’t load the paper sideways.

5 Slide the edge guide over.

Turn on the NX400 Series

1 Connect the power cable.

Note: Do not connect to the computer at this time.

2 Press the On button.

Load paper

1 Open the paper support and pull up the extensions.

2 Open the output tray, pull out the extensions, and raise the stopper.

8½ 11

4 6

Change your language

You can change the language that appears on your LCD display screen

from English to French, Spanish, or Portuguese.

1 Press Setup.

2 Press to select Maintenance, and press OK.

3 Press to select Language, and press OK.

4 Press or to select your language, and press OK.

Install cartridges

Note: Do not load paper yet.

1 Lift up the scanner.

2 Open the cartridge

cover.

3 Shake the ink cartridges,

then unpack them.

4 Remove only the yellow tape from each cartridge.

Caution: Do not remove

any other seals or the

cartridge may leak.

5 Insert the cartridges in the holder for

each color.

6 Press each cartridge down until it clicks.

7 Close the cartridge cover. Press down until

it clicks.

8 Lower the scanner.

(Included for Canada only)

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Start Here

Epson Stylus® NX400 SeriesStart Here9 Press the OK button to charge the ink. Charging takes about 2½ minutes. Caution: Don’t turn off the NX400 Seri

Page 2

Epson Stylus® NX400 SeriesStart Here9 Press the OK button to charge the ink. Charging takes about 2½ minutes. Caution: Don’t turn off the NX400 Seri

Page 3

Epson Stylus® NX400 SeriesStart Here9 Press the OK button to charge the ink. Charging takes about 2½ minutes. Caution: Don’t turn off the NX400 Seri

Page 4

Epson Stylus® NX400 SeriesStart Here9 Press the OK button to charge the ink. Charging takes about 2½ minutes. Caution: Don’t turn off the NX400 Seri

Page 5 - Control panel

Macintosh1 Insert the NX400 Series CD. 2 Double-click the Epson icon. 3 Click Install and follow the on-screen instructions.4 When prompted, c

Page 6

Macintosh1 Insert the NX400 Series CD. 2 Double-click the Epson icon. 3 Click Install and follow the on-screen instructions.4 When prompted, c

Page 7

Macintosh1 Insert the NX400 Series CD. 2 Double-click the Epson icon. 3 Click Install and follow the on-screen instructions.4 When prompted, c

Page 8

Macintosh1 Insert the NX400 Series CD. 2 Double-click the Epson icon. 3 Click Install and follow the on-screen instructions.4 When prompted, c

Commentaires sur ces manuels

Pas de commentaire

Epson Stylus NX400 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Imprimer et scanner Epson Stylus NX400. Epson Stylus NX400 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Epson Stylus NX400