Epson 1420Wi Guide d'installation télécharger pdf (Page 17)

English

6. Attach the two markers you removed from the Touch Unit to the marker positions shown on the

projected screen ( ) ( ).

Match the positions so that the crosses ( ) overlap with the points ( ) on the marker positions

( ) ( ). Move the marker over the projected cross until the lines of the cross align with the lines

on the marker.

When pointers ( ) ( )

with the same color (blue and green) as the marker positions are

displayed on the left and right of the projection screen, attach the markers to the projection screen as

follows:

• For magnetic screens: Place the bottom of the markers onto the screen.

• For non-magnetic screens: Use the supplied tape to secure the markers. Attach the tape so that each

end of the marker is secure on the screen.

Blue marker

position

Green marker

position

Correct position Incorrect position

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Pas de commentaire

Epson 1420Wi Guide d'installation Page 17