Epson PowerLite 1720 Multimedia Projector Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Projecteurs de données Epson PowerLite 1720 Multimedia Projector. Epson PowerLite 1720 Multimedia Projector Quick Setup Guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Before using the projector, make sure you read the safety instructions in
the User’s Guide on your projector CD.
1
Locate the required cables:
2
Connect the computer cable to
the blue Computer (Component Video)
port on the projector.
3
Connect the other end to your notebook’s
video-out or monitor port.
4
Connect the power cord to the
projector, then plug the other end
into an electrical outlet.
1
Turn on your notebook.
2
Open the A/V Mute slide (lens cover).
NOTE: The slide must be
opened completely.
3
Make sure the Power light
is orange and not flashing.
4
Press the Power button
to turn on the projector.
The projector beeps once,
and the Power light flashes
green and then stays on.
S
T
A
R
T
H
E
R
E
Turn on your equipment
Connect the projector
to your notebook
Follow these instructions to connect the projector to your
notebook. For other setup options, see your User’s Guide.
PowerLite
®
1720/1730W
Quick Setup
VGA computer cable
1
If you’ve turned on your notebook and switched it to external display,
but you don’t see an image, press the Source Search button on the
projector or the Search button on the remote control to select the
image source.
NOTE: If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
To raise the image, press
the foot release button
for the front adjustable
foot and lift the front.
Release the button to
lock the foot in position.
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or
enlarge the image.
4
If your image looks like or , you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
5
If your image looks like or , press the or button
on the projector to correct it.
Adjust the image
To shut down the projector, press the Power button twice and
simply unplug it. You don’t have to wait for the projector to cool off.
Turn over
Power light
Power button
Zoom
Focus
Power cord
*411482100*
*411482100*
4114821 Rev.0
1-F C
4114821 Rev.0
1-F M
4114821 Rev.0
1-F Y
4114821 Rev.0
1-F K
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Adjust the image

Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD.1 Locate the required cables: 2 Co

Page 2 - Troubleshooting

If this is your first time using the remote, make sure its batteries are installed as shown (two AA batteries).You can use the remote control to opera

Commentaires sur ces manuels

Pas de commentaire