Epson S30670 Guide d'installation télécharger pdf (Page 18)

16 | Installing the Take-up Reel System

3. Connect the communication cord that is attached to the take-up reel system by running it through the

horizontal struts to the back of the printer. Place the cable in the cable supports and plug it in, making

sure to tighten the screws on the plug to secure it in place.

4. Connect the power cords to the printer and use the cable supports to restrain the cords as shown.

5. Plug the printer into outlets that are easily accessible. Note that two outlets are required, for a total of

20 amps. It is recommended that the outlets be powered by a dedicated 30-amp circuit.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 101 102

Pas de commentaire

Epson S30670 Guide d'installation Page 18