Epson C823781 - Net Print Server Spécifications télécharger pdf (Page 235)

Troubleshooting 223

The message “Could not complete communicating

configuration data” appears when you send settings to the print

server.

Cause What to do

This may happen when using

a dial-up router.

Run Command Prompt from the

computer on which EpsonNet

WinAssist/MacAssist is installed, and

then enter the following command:

Format: >ROUTE_ADD_the IP address

of the print server_ the IP address of the

computer (the under bar represents one

space)

Example: >ROUTE ADD 192.168.192.168

22.33.44.55.

Unable to start EpsonNet WebAssist.

Cause What to do

You have not set the IP

address for the print server.

Set the IP address for the print server

using EpsonNet WinAssist, MacAssist,

the printer’s control panel, or the

arp/ping commands. You can check the

IP address on a status sheet. See

“TCP /I P” on page 58, “T CP/IP” on page

83, or “Setting an IP Address Using the

arp/ping Command” on page 234.

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 257 258

Pas de commentaire

Epson C823781 - Net Print Server Spécifications Page 235