Epson PowerLite 260D Guide de l'utilisateur Page 18

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 109
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 17
18 Setting Up the Projector
Connecting With the VGA Cable
Follow these instructions to connect to your computer with the VGA
cable that came with your projector. Before you start, make sure your
computer and the projector are turned off.
1. If you are connecting the projector to a desktop computer,
disconnect the monitor cable from your computer.
2. Locate the VGA computer cable that came with the projector.
Connect one end of the cable to the projector’s
Computer
(PowerLite 260d), or
Computer1 or Computer2
(PowerLite 280d) port.
3. Connect the other end of the cable to your computer’s image-out
or monitor port.
If you’re using a PowerBook or iBook and you can’t connect the
cable, you may need to use an optional Macintosh image adapter;
see your computer dealer.
4. If you want to view the display simultaneously on your computer
monitor and the projector screen, see page 21.
5. Tighten the screws on the connectors.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 31 for instructions.
VGA computer cable
Connect VGA
computer cable
PowerLite 260d
PowerLite 280d
Vue de la page 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 108 109

Commentaires sur ces manuels

Pas de commentaire