Epson PowerLite 503c Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Projecteurs Epson PowerLite 503c. PowerLite 503c - Quick Start - Epson America, Inc. Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
S
T
A
R
T
H
E
R
E
EPSON
®
PowerLite
®
503c/713c
Quick Setup
Connect the power cord to your projector and plug the other end into a grounded outlet.
3
Connect the other end to your laptop’s video or monitor port. If you can’t connect the cable
to your PowerBook
®
, you may need to use an adapter. See your User’s Guide for instructions.
Locate everything
you’ll need
Plug in your projector
Turn on your equipment
Caution: Before unplugging
the projector...
To shut the projector down properly:
1. Press the red Power button twice.
Let the projector cool while the power
light flashes orange (about a minute).
2. Once the light stops flashing and stays
on, it’s safe to unplug the projector.
Never unplug the projector when the
power light is green or flashing orange.
For this setup, you’ll need just these two cables:
You won’t need to install any software.
1
2
Make sure your projector and laptop are turned off.
Connect one end of the computer cable to
the Computer port on the projector.
Connect the projector
to your laptop
power cord computer cable
The power light
turns orange.
Rotate the lens ring to pop out the lens,
then squeeze the tabs to remove the lens cap.
Pop out the lens
To turn on the projector, press the red Power button.
The power light flashes green, and then stays on.
Turn on or restart your laptop. (Windows
®
only: If you see
this Add New Hardware screen, click Cancel.)
Power button
1
2
Follow these
instructions to
connect your laptop
to the projector.
To connect other
devices, such as a VCR
or desktop
PC, see
your User’s Guide.
Turn Over
squeeze here
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Quick Setup

STARTHEREEPSON®PowerLite®503c/713cQuick SetupConnect the power cord to your projector and plug the other end into a grounded outlet.3Connect the other

Page 2 - EPSON PowerLite 503c/713c

EPSON PowerLite 503c/713cIf you see a blank screen or the No signal messageafter turning on your laptop, check the following:  Make sure the powe

Commentaires sur ces manuels

Pas de commentaire