Epson BrightLink Solo Interactive Module (IU-01 Guide d'installation télécharger pdf (Page 16)

Note

If you are using a whiteboard, the image may not fill the entire board, depending on its size and aspect ratio.

4 Connect your computer to the interactive module using the USB cable. If the cable is not long enough

to reach your computer, you may need to use a USB extension cable (not included).

5 Launch the Easy Interactive Driver.

Click the icon in the lower right corner of your screen (Windows

) or in the Dock (Mac OS

6 Select

Calibrate (Normal) or Calibrate (Advanced).

Normal calibration is faster and appropriate for most situations (unless you plan to work with very

detailed images).

7 Follow the instructions on the screen to calibrate. Make sure you touch each dot as it appears.

8 Use the pen as a mouse by tapping it on the projected image.

• For best performance, hold the pen at an angle (like a normal pen), rather than perpendicular to

the board.

• To left-click, tap on the board. Tap twice to double-click.

• To right-click, tap while pressing the button on the pen.

• To click and drag, tap and drag with the pen.

Battery indicator

light

Button

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Pas de commentaire

Epson BrightLink Solo Interactive Module (IU-01 Guide d'installation Page 16