Epson 745c Guide de démarrage rapide télécharger pdf

2 Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the image.

3 If your image looks like or , you’ve placed the projector off

to one side of the screen at an angle. Place it directly in front of the

screen, facing the screen squarely.

4 If your image looks like or , press the or buttons on

the projector to correct it.

EPSON

PowerLite

745c

Quick Setup

1 Turn On Your Equipment

1 Connect the power cord to the back of the projector and plug the other

end into an electrical outlet.

2 Remove the lens cover.

3 Remove the battery cover on the remote control. Locate the batteries

that came with the projector and insert them as shown. Then replace

the battery cover.

4 To turn the projector on, press the red Power button on the

projector or the remote control. The projector beeps once, and the

projector’s Power light flashes green and then stays on.

CAUTION: Before unplugging the projector...

Shut the projector down properly:

1. Press the Power button twice. Let the projector cool while the

Power light flashes orange (about 30 seconds).

2. Once the light stops flashing and the projector beeps, it’s safe to

unplug the projector.

How do you want to get images to the projector?

• To connect to a notebook, see “If connecting

to a notebook” below.

• To project over an 802.11g/b network, see

“If projecting wirelessly” on the back of this sheet.

You must have installed the projector’s EasyMP

software and configured your projector and

computer before you can project wirelessly.

See your User’s Guide for instructions.

• To give a presentation stored on a memory card,

see Chapter 5 in your User’s Guide.

If connecting to a notebook...

1 Make sure you’ve turned on the projector and adjusted the image

as described in sections 1 and 2.

2 Locate the computer cable that came with the projector. Connect

one end to the projector’s blue Computer/Component Video port.

Connect the other end to your notebook’s video-out port or

monitor port. If you can’t connect the cable to your

PowerBook

, you may need to use an adapter. See your

PowerLite 745c User’s Guide for instructions.

3 Press the Source Search button on the projector until your

computer image is displayed.

Choose a

Presentation Method

1 To raise the image, press the blue foot release button for the front

adjustable foot and lift the front. Release the button to lock the

foot in position.

2 Adjust the Image

Turn over

Zoom

Focus

Computer cable

Wireless card

1 2 3 4

Résumé du contenu

Page 1 - 2 Adjust the Image

2 Turn the focus ring to sharpen the image.Turn the zoom ring to reduce or enlarge the image.3 If your image looks like or , you’ve placed the project

Page 2

2 Turn the focus ring to sharpen the image.Turn the zoom ring to reduce or enlarge the image.3 If your image looks like or , you’ve placed the project

Page 3 - Where To Get Help

Once the card is inserted, the projector displays a screen like this:4 Windows: From the Start menu, select EMP NS Connection.Macintosh OS X: Double-c

Page 4

Once the card is inserted, the projector displays a screen like this:4 Windows: From the Start menu, select EMP NS Connection.Macintosh OS X: Double-c

Commentaires sur ces manuels

Pas de commentaire

Epson 745c Guide de démarrage rapide

Naviguer en ligne ou télécharger Guide de démarrage rapide pour Projecteurs Epson 745c. Epson 745c Quick Start Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Epson 745c