Epson U01II - UB Print Server Manuel d'utilisateur télécharger pdf (Page 2)

How to connect an Epson POS printer with Ethernet Interface

http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]

Type III

Type IV

Click to select

Type IV

Installation Steps for Installing Ethernet Adapter

(Type IV)

The Type IV module (UB-E02 or similar) is the latest type of Connect-It Ethernet adapter. The module can be set by

accessing it directly using a web browser or by a configuration utility. This type of module can also act as a device type

Print server to be used by more than 1 computer.

Installing and Setting the Connect-It Ethernet Adapter (Type IV)

Install the Connect-It Ethernet adapter into the Epson TM series printer

The Type IV adapter can replace the existing adapter and is held in place by 2 screws.

If changing a printer to Ethernet you must change the specific dip switch on the Epson printer to allow for the Ethernet

card.

1 2 3 4 5 6 7 ... 12 13

Pas de commentaire

Epson U01II - UB Print Server Manuel d'utilisateur Page 2