Epson TM U295 - B/W Dot-matrix Printer Manuel de l'opérateur télécharger pdf (Page 37)

Reference Information 4-5

Printing position

Notes

1. The mechanical form stopper is adjustable in the range 26.5 to

36.5 mm (1.04 to 1.44”).

2. The TOF and BOF sensors are fixed and cannot be adjusted.

3. After slip paper is set at the mechanical form stopper, the top

margin can be shortened up to 21.2 mm (.83”) by feeding the

paper backwards (ejection feeding).

4. When ejection feeding is not performed after printing, printing

can be performed up to the position at which the paper edge is

no longer held by the paper feed roller (13.8 mm (.54”) from the

paper edge).

5. When ejection feeding is performed after printing, the paper

can be fed forward up to 11.8 mm (.46”) (28 dots) after the

bottom edge is detected.

Last printing position

Paper feed roller

NOTE 2. BOF sensor (fixed)

NOTE 2. TOF sensor (fixed)

NOTE 1. Mechanical form stopper

First printing position

65.84 (2.59")

Printing position at minimum top margin

12.5 (.49")

Reverse paper feed

Forward paper feed

Adjustable

12.5 (.49")

5 (.20")

NOTE 4. 13.8 (.54")

NOTE 5. 15.5 (.61")

NOTE 3. 5.3 (.21")

27.3 (1.07")

2.3 (.09")

10 (.39")26.5 (1.04")

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 73 74

Pas de commentaire

Epson TM U295 - B/W Dot-matrix Printer Manuel de l'opérateur Page 37