Epson Subli-Print 4450 Informations techniques télécharger pdf (Page 11)

After approx 2 minutes, ink lever messages will

appear on the LCD display. Raise or lower the ink

lever as instructed until READY appears. This

indicates that the initial charge cycle is complete.

Never perform the following tasks whilst the pause

light is flashing, otherwise damage may occur:

 Turn off the printer.

 Open the top cover.

 Remove the rear cover.

 Move the paper lever to the release.

 Remove the ink cartridges.

 Remove the maintenance tank.

 Unplug the power cord.

Insert the USB A to USB

B cable here. (supplied)

** Do not plug in to the

computer yet **

We will now complete the following steps, in

order to:

i) Install the Printer Driver.

ii) Install the ICC Profile - to ensure correct colour

on your print outs.

iii) Configure the printer driver.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Pas de commentaire

Epson Subli-Print 4450 Informations techniques Page 11