Epson Stylus Color IIs Spécifications télécharger pdf (Page 67)

Word format:

Data bit

Parity bit

Start bit

Stop bit

8 bits

None

1 bit

Connector: 8-pin mini-circular connector

Recommended cable: Apple System Peripheral-8 cable (M0197)

Initialization

The printer can be initialized (returned to a fixed set of conditions) in

these ways:

Hardware initialization ∗ The printer is turned on.

∗ The printer receives an

INIT signal from

the parallel interface: pin 31 goes LOW

Software initialization ∗ Software sends the ESC @ (initialize the

printer) command; the last panel

settings are kept

Control panel initialization ∗ Hold down the Pause button and the

Alt button; the last panel settings are

kept

All three initialization methods reset the font according to the default

settings selected using the control panel. However, ESC @ does not

initialize the printer mechanism, clear the input data buffer, or clear the

user-defined character set. The control panel initialization does not

initialize the printer mechanism or clear the user-defined character set.

A-12

Technical Specifications

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 84 85

Pas de commentaire

Epson Stylus Color IIs Spécifications Page 67