Epson PA-295 Instructions d'exploitation télécharger pdf (Page 14)

While holding down the RELEASE button, turn the printer

back on.

Remove your finger from the RELEASE button. The

printer prints the current printer settings and then eject

the paper.

Press the RELEASE button to eject the paper completely

and insert new paper to begin the second part of the test.

After the printer prints a pattern, it prints the following message:

***completed***

The printer ejects the paper; then enters the normal

mode.

You can change several interface settings by changing the DIP

switch settings. If you need to change any of these settings,

follow the steps below:

1. Make sure that the printer is off.

1-14 Installation

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Pas de commentaire

Epson PA-295 Instructions d'exploitation Page 14