Epson M119D Manuel de l'opérateur télécharger pdf (Page 32)

2-2 Using the Printer

Indicator lights

The control panel lights provide information on printer conditions.

POWER

(Green)

The POWER light is on when the printer power is on.

PAPER OUT

(Red)

This light is on when the paper roll is at the end or near the end.

This light blinks in the following cases. When it blinks, press the

PAPER FEED button.

❏ In the self-test standby mode

❏ In the on-line recovery standby state after semi-auto loading

Note:

The paper near-end detector is an option.

ERROR (Red)

This light is on when the printer is off line. It blinks to indicate an

error condition.

The blinking pattern shown below indicates that the temperature

of the print head is too high. The printer recovers automatically

and resumes printing when the head cools.

If the printer stops working and the ERROR light is blinking, turn

the printer off, check for jammed paper, and remove it by following

the instructions on page 3-3, if necessary. Then turn the printer

back on. If the printer still does not work, unplug the power supply

cord from the outlet immediately; then contact a qualified service

person.

Approximately 160 ms

200b-ops.book : 200bo2r1.fm Page 2 Monday, September 22, 1997 11:46 AM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Pas de commentaire

Epson M119D Manuel de l'opérateur Page 32