Epson LX-300+II Spécifications télécharger pdf (Page 14)

Epson LX-300+II

14 - Epson LX-300+II 7/06

Default Settings

While you can often set the default settings through your

application software or printer driver, you may need to change a

default setting from the printer’s control panel using Default

setting mode. The table below lists the default settings (in bold)

and options you can select in this mode. (For more information,

see the Reference Guide.)

)

* These settings take effect only when IBM 2380 Plus emulation is

selected.

Changing Default Settings

Follow the steps below to enter Default Setting mode. If you

use single sheets, you’ll need to load a new sheet of paper each

time the printer ejects a printed page.

1. Make sure paper is loaded and the printer is off.

2. Hold down the

Tear Off (Font) button and then turn on

the printer.

The printer enters Default Setting mode and prints

instructions for selecting the language. The current

language is indicated by which control panel lights are on.

(For English, only the Pause light is on.)

3. If you want a different language, press the

LF/FF button

until the lights show the language you want.

4. Press the

Tear Off (Font) button to print a list of all the

current settings.

5. If the settings are all correct, turn off the printer to exit

Default Setting mode.

If you want to change any settings, go to step 6.

6. Press the

Tear Off (Font) button. The printer prints

instructions for changing the settings.

7. Press the

LF/FF button to scroll through the options for the

selected setting until you see the one you want. Then press

the

Tear Off (Font) button to select the next setting you

want to change.

8. When you finish making settings, turn off the printer to exit

Default Setting mode.

Your new settings remain in effect until you change them again

or reset the printer’s defaults.

Restoring the printer’s default settings

If you want to restore all the factory default settings, turn off the

printer. Then hold down the

Load/Eject, LF/FF, and Pause

buttons while you turn on the printer.

Settings Options

Page length for tractor Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8,

8.5, 11, 70/6, 12, 14, 17

Skip over perforation On, Off

Auto tear-off On, Off

Auto line feed On, Off

Print direction Bi-D, Uni-D

Software ESC/P, IBM 2380 Plus

0 slash On, Off

High speed draft On, Off

I/F (interface) mode Auto, Parallel, Serial

Auto I/F wait time 10 seconds, 30 seconds

Baud rate (bps) 19200, 9600, 4800, 2400, 1200, 600,

300

Parity None, Odd, Even, Ignore

Data length 7 bit, 8 bit

Parallel I/F bidirectional mode On, Off

Packet mode Auto, Off

Character table* Standard model:

Italic, PC 437, PC 850, PC 860,

PC 863, PC 865, PC 861, BRASCII,

Abicomp, Roman 8, ISO Latin 1,

PC 858, ISO 8859-15

All other models:

Italic, PC 437, PC 850, PC 437 Greek,

PC 853, PC 855, PC 852, PC 857, PC

866, PC 869, MAZOWIA, Code MJK,

ISO 8859-7, ISO Latin 1T, Bulgaria, PC

774, Estonia, ISO 8859-2, PC 866

LAT, PC 866 UKR, PC APTEC, PC 708,

PC 720, PC AR864, PC 860, PC 863,

PC 865, PC 861, BRASCII, Abicomp,

Roman 8, ISO Latin 1, PC 858, ISO

8859-15, PC 771, PC437 Slovenia, PC

MC, PC1250, PC1251

International character set for

Italic table

Italic U.S.A., Italic France, Italic

Germany, Italic U.K., Italic Denmark1,

Italic Sweden, Italic Italy, Italic Spain1

Manual feed wait time 1 second, 1.5 seconds,

2 seconds, 3 seconds

Buzzer On, Off

Auto CR (IBM 2380 Plus)* On, Off

IBM character table* Table 1, Table 2

1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Epson LX-300+II Spécifications Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Epson LX-300+II